• APPLICATION

    Hidden fastening system that provides a secure face-fastened connection with precision cut plugs made from actual decking and cladding materials. Installation is a two-step process utilizing a setting tool, screws and plugs. All components must be used together as instructed to ensure proper function.

  • FEATURES

    • Plugs are for 1″ nominal (or greater) material and available in all leading deck and cladding brands
    • Available in Kits (screws, plugs and tool) and Inventory Management (system components sold separately)
    • Patented PVC/Composite Tool with Auto-Stop™ sets screw to the correct depth without stripping screw recess
    • Free spinning stop collar on setting tool prevents damage to the board surface
    • Screws feature a Type 17 auger tip for faster, easier insertion and to help prevent splitting

  • INSTALLATION

    Follow all decking and cladding manufacturer instructions, including specifications for screw spacing, edge/end distances, and gapping. Predrilling is recommended for all composite deck boards. Predrill a 3/16″ pilot hole through the decking material only; not the joist. For DuraLife® decking, use a 7/32″ pilot hole.

    • Fit setting tool with application specific driver bit, marked “DECK”.
    • Drive the screw with the PVC/Composite Tool using a standard drill on high speed.
    • Do not use impact driver with setting tool.
    • The setting tool’s Auto-Stop™ mechanism will make a “pop” sound when the screw is set to the correct depth. (Do not hesitate or slow down while driving.)
    • Insert plug into hole and tap with a smooth-faced hammer until the plug is flush with board.

  • Drive screw with PVC/Composite Tool. Insert plug and tap with smooth-faced hammer.

  • For use with Impact Driver. Built in Magnet. Insert plug and tap with smooth-faced hammer.

PLUGS AVAILABLE IN THE FOLLOWING BRANDS

AMERICAN PRO
ARMADILLO®
AZEK®
BARRETTE®
CLUBHOUSE®
DECKORATORS®
ENDECK®
ENVISION®
EVA-LAST®
FIBERON®
MOISTURESHIELD®
TIMBERTECH®
TIVA®
TREX®
VEKADECK®
WEARDECK™
WOLF

New board brands are always being added to our product offering. Please refer to our website or contact
Starborn® customer service if you do not see the board brand you are looking to use on your project.

SYSTEM COMPONENTS

  • PVC/Composite ToolFor setting screws to the correct depth

  • ScrewsEpoxy coated, grade 305 or marine grade 316 stainless, or epoxy coated grade 410 stainless for metal framing

  • PlugsMade from actual PVC/ Composite decking and trim material

  • Impact Driver Bit For use with impact drills

  • PRO PLUG® SYSTEM DECK PACKAGING

    INVENTORY MANAGEMENT-SCREWS ONLY
    LENGTH FINISH SCREWS COVERAGE
    2″ Epoxy 100 –
    375 100 sq ft
    1125 300 sq ft
    2-3/4″ 100 –
    375 100 sq ft
    1125 300 sq ft
    3″ 100 –
    375 100 sq ft
    1125 300 sq ft
    2″ 305 Stainless 100 –
    375 100 sq ft
    1125 300 sq ft
    2-1/2″ 100 –
    375 100 sq ft
    1125 300 sq ft
    3″ 100 –
    375 100 sq ft
    1125 300 sq ft
    2-1/2″ 316 Stainless 100 –
    375 100 sq ft
    1125 300 sq ft
    3″ 100 –
    375 100 sq ft
    1125 300 sq ft
  • KIT PACKAGING
    LENGTH FINISH COVERAGE SCREWS PLUGS TOOL
    2-3/4″ Epoxy 100 If 150 165 1
    100 sq ft 350 375 1
    300 sq ft 1050 1125 1
    2-1/2″ 305 Stainless 100 If 150 165 1
    100 sq ft 350 375 1
    300 sq ft 1050 1125 1
  • INVENTORY MANAGEMENT-PLUGS ONLY
    PLUGS COVERAGE
    100 –
    375 100 sq ft
    1125 300 sq ft
  • FOR METAL FRAMING-CAP-TOR XD METAL
    LENGTH FINISH SCREWS COVERAGE
    1-5/8″ Epoxy Coated 410 Stainless (Metal Framing) 375 100 sq ft

For Metal Framing

Use 1-5/8″ CAP-TOR xd Metal screw and purchase plugs and PVC/Composite Tool separately.

FINISH

Epoxy coated
Grade 305 Stainless
Grade 316 Stainless

CORROSION

Exterior Use

Approved for use in ACQ and pressure treated lumber.

For salt water or other areas where corrosion is a concern, use Grade 316 Stainless.

DRIVE SYSTEM

Star Drive

TOOL COMPATIBILITY

PVC/Composite Tool
PVC/Composite DECK Bits

RELATED INFORMATION