-
APPLICATION
- Clip&Rip® Universal Hidden Deck Clip provides faster installation over traditional hidden clips. The 16 pre-assembled collated strips with stainless steel screws allow for one-pass fastening in one go saving time and money on the job site.
-
FEATURES
- One-Pass Fastening: fastener can be installed in one go. The clip will remain level for sliding the next board in place
- Compression Tabs: “bite” down into the joists, keeps clip level after screw is completely installed
- Ease-of-Use: no additional tools needed. Installation is as easy as Insert, Drive, Snap!
- Universal Compatibility: suitable for grooved composite, PVC, and hardwood decking
- Time & Costs Savings: 16-clips per strip allow for installation of a full 20ft board
- Consistent & Clean Look: clip creates 3/16″ spacing between boards
- Corrosion Resistance: 305 and 316 stainless steel options available. 316 stainless allows for us in marine environments. Suitable for ACQ and pressure-treated lumber.
- Packaging Options: available in 192ct packs covering 100 sq ft and 800ct packs for 425 sq ft
-
INSTRUCTIONS
- Insert the strips of clips with the
arrow pointing forward into the leading board groove. Center over joist. - Drive the screws down in a straight and steady fashion until the head of the screw is flush with the clip.
- Lift up on strip to break off installed clip.
- Install clips at every joist along length of board.
- Place next board into position. Holding the deck board at a slight angle, push deck board into previously installed clips.
Check between boards to ensure consistency.
- Insert the strips of clips with the
arrow pointing forward into the leading board groove. Center over joist.
CLIP&RIP® WARRANTY
- Build with Confidence! Clip&Rip® Universal Deck Clips are warranted for use in grooved hardwood, thermally modified, PVC, and composite deck boards, including Trex®, TimberTech®, Fiberon®, MoistureShield®, Deckorators®, Armadillo® and more.
Read full warranty
-
Step 1: Insert
-
Step 2: Drive
-
Step 3: Snap
-
Step 4: Slide board & Repeat
ESTIMATED COVERAGE
BRAND COMPATIBILITY
Trex®
TimberTech®
Fiberon®
Deckorators®
MoistureShield®
Wolf
EVA-LAST®
Envision®
NewTech Wood®
Sylvanix®
Veranda®
VekaDeck®
- Trex®: Select, Transcend, Transcend Lineage, Signature, Enhance
- TimberTech®: Legacy, Reserve, Prime, Prime+, Terrain, (AZEK) Harvest, (AZEK) Landmark, (AZEK) Vintage
- Fiberon®: Paramount, Promenade, Goodlife, Concordia, Sanctuary
- Deckorators®: Picture Frame, Venture, Vault, Vista, Voyage, Trailhead, Tropics (Lowes), Distressed (Lowes)
- MoistureShield®: Vision, Meridian, Elevate, Vantage
- Wolf : Perspective
- EVA-LAST®: Apex, Infinity
- Envision®: Distinction, Expression, Evergrain, Ridge Premium
- NewTech Wood®: Magellam, Voyager
- Sylvanix®: Elements, Destinations, Elite Essentials, Elite Collection, Skyline
- Veranda®: Elite, High-Performance
- VekaDeck®: Groove
SYSTEM COMPONENTS
SYSTEM PACKAGING
CLIP&RIP® STARTER CLIP PACKAGING
STARTER CLIP INSTRUCTIONS
- For first and last boards, screw a starter clip at every joist.
- Once all starter clips are installed, push the first deck board into starter clips.
- Proceed to fasten remainder of boards with standard clips
*Starter clips are only available in 305 stainless steel
